YLW series thermal oil boiler

YLW series thermal oil boiler Introduction

YLW series horizontal thermal oil boiler have pipe rack structure, assembled with mechanical chain grate, main body have convection and radiation pipe square coil; convection heating surface is assembled by serpentine radiation pipes.

It's increasing heating surface and low down the height of main body and enhancing boiler overload ability.

This model can get less than 350℃ under pressure of 1.0MPA.it can be used in chemicals, light industries construction materials food processing, packing equipment, plastic industry and rubber industries and so on.

Application fileds

Our oil/gas fired boilers can be divided into DHS series angle tube boiler,SZS water tube boilers and WNS fire tube boilers depending on the medium inside the tubes. With multiple pressure designs, the water tube boilers can meet the steam supply requirements of 2.5MPa or above. The fire tube boilers, on the contrary, are intended for use at pressures below 2.5 MPa. Fire tube boilers usually have a capacity of below 20t/h, while water tube ones of 20t/h or more as capacity expansion is possible.
The three series are designed with large furnaces, the thermal efficiency is over 98%, and the NOx emissions are as low as 30mg/Nm3. The front and rear smoke boxes are all equipped with a unique sealing structure to ensure that the smoke box does not leak smoke. At the same time, it has the characteristics of fully automatic and safe operation.